Rosemount
YokoGawa
ABB
E+H
HoneyWell
Micro Motion Coriolis
Rosemount
Yokogawa
E+H Soliswitch FTE20 Level Switch
Rotary paddle switch with built-in fault detection designed for silos containing granular solids.
E+H Liquiphant FTL51C Level Switch
Point level switch for all kinds of liquids with high corrosion-resistant coating.
E+H Solicap FTI56 Level Switch
Point level detection for fine-grained to coarse-grained bulk solids.
E+H Liquifloat FTS20 Float Switch
Point level switch used for overflow prevention or pump protection in tanks and vessels with appropriate fluids.
E+H Nivotester FTL325N Level Switch
Switching unit for point level detection in liquid tanks with NAMUR input for rail mounting or single installation.
E+H Nivector FTI26 Point Level Switch
Cost-Effective Level Switch for Solids in the Food Industry and Powder Applications.
E+H Liquipoint T FTW32 Level Switch
Rope probe designed for multipoint detection for up to 5 switch points.
E+H Solicap FTI55 Level Switch
Point level detection for fine-grained to coarse-grained bulk solids.
E+H Solicap FTI77 Level Switch
Point level detection for bulk solids, especially for high temperatures and strong mechanical loads.
E+H Liquiphant FTL71 Level Switch
Switch with extension tube for liquids in high-temperature applications.
E+H Soliwave FQR56 Level Switch Emitter
Microwave barrier emitter for non-contact point level detection in bulk solids.
E+H Soliwave FDR56 Level Switch Receiver
Microwave barrier receiver for non-contact point level detection in bulk solids.
E+H Liquiphant FTL70 Level Switch
Designed for high process temperatures up to 280°C and can be used for Safety Instrumented Systems up to SIL2.
E+H Soliphant FTM21 Level Switch
For applications with fine-grained or coarse-grained, non-fluidized bulk solids.
E+H Nivotester FTW325 Level Switch
Point level switch with intrinsically safe signal circuit for connecting to conductive sensors.
E+H Liquipoint FTW23 Level Switch
Developed and built for the food industry and meets all international hygiene requirements.
E+H Proline Promag P 10 Electromagnetic Flow Meter
The E+H Proline Promag P 10 Electromagnetic Flow Meter is dedicated to chemical and process applications with corrosive liquids and high medium temperatures. With its straightforward hard- and software design, the Proline Promag P 10 simplifies every step in its life cycle from engineering to servicing at usual Endress+Hauser quality. Heartbeat Technology ensures safe processes.
E+H Proline Promag D 10 Electromagnetic Flow Meter
The E+H Proline Promag D 10 Electromagnetic Flow Meter is designed for all basic water applications where space is at a minimum. With its straightforward hard- and software design, the Proline Promag D 10 simplifies every step in its life cycle from engineering to servicing at usual Endress+Hauser quality. Heartbeat Technology ensures measurement reliability and compliant verification.
E+H Proline Promag W 300 Electromagnetic Flow Meter
The E+H Proline Promag W 300 electromagnetic flow meter is designed for demanding water and wastewater applications, and for use in hazardous areas and under harsh conditions. The flow meter features a compact, dual-compartment housing, up to three input/outputs, and accurate bidirectional measurement independent of pressure, density, temperature and viscosity.
The W 300\’s compact, easily accessible transmitter offers high flexibility for operation and system integration. The transmitter features access from one side, a remote display, and improved connectivity options. The W 300 transmitter does not require a proprietary communication system. It offers full access to process and diagnostic information via numerous, freely combinable I/Os and fieldbuses. Heartbeat Technology ensures compliance and process safety at all times.
E+H Proline Promag W 400 Electromagnetic Flow Meter
The E+H Proline Promag W 400 electromagnetic flow meter measures volume flow, conductivity and mass flow. It features certified corrosion protection (EN ISO 12944) for underground or permanent underwater installation making it an ideal fit in water, wastewater and custody transfer industries. The bidirectional measuring principle is not dependent on pressure, density, temperature and viscosity. Because it has no moving parts, the Promag W 400 is maintenance-free and applications suffer no pressure loss due to cross-section constriction.
E+H transmitters do not require proprietary communication system, rather they offer full access to process and diagnostic information via numerous, freely combinable I/Os and fieldbuses. The W 400 allows for up to three analog or digital outputs. Digital communication options include HART, PROFIBUS DP, EtherNet/IP and Modbus RS485. This E+H flow meter is housed in an IP66/67, Type 4X enclosure standard, while IP68, Type 6P protection is also available as an option for the remote sensor. The IP68, Type 6P protection also includes a protective varnish according to EN ISO 12944 C5‐M/Im1/Im2/Im3.
The E+H Proline Promag W 400 electromagnetic flow meter can measure flow from 2.5 gal/min up to 700 Mgal/d and can handle a variety of media temperatures, depending on liner material. Two liner materials are available including hard rubber (32 to 176°F) and polyurethane (-4 to 122°F). The standard maximum measured error is ±0.5 % of reading ± 1 mm/s and the Proline Promag W 400 offers an improved accuracy of ±0.2 % of reading ± 2 mm/s. Optional Heartbeat Technology ensures compliance and process safety at all times.