Rosemount
YokoGawa
ABB
E+H
HoneyWell
Micro Motion Coriolis
Rosemount
Yokogawa
Part Number: STG84L-E1G000-1-C-BHB-11S-B-21A0-FX,F1,02-0000
Model: Gauge In-Line Pressure Transmitter
Manufacturer: Honeywell
Condition: New & Original in Factory Packing
Factory Warranty: 12 Months
Ordering Information
| Model | STG84L | Gauge In-Line Pressure Transmitters |
| Process Head & Diaphragm Materials |
E | Process Head/ Reference Head Material(1): 316 Stainless Steel / 316 Stainless Steel Barrier Diaphragm Material: 316L SS |
| Fill Fluid | 1 | Silicone Oil 200 |
| Process Connection |
G | Size/Type: 1/2\’ NPT (female)
Material: Same as Process Head(2) |
| Bolt/Nuts Materials |
0 | None |
| Vent/Drain Type/Location |
0 | Head Type: None Vent Type: None Location: None Vent Material: None |
| Gasket Materials |
0 | None |
| Head/Connect Orientation |
1 | High Side Left, Low Side Right(3) / Std Head Orientation |
| Approvals | C | ATEX Explosion proof, Intrinsically Safe & Non-incendive |
| Electronic Housing Material & Connection Type |
B | Material: Polyester Powder Coated Aluminum
Connection: M20 |
| Output/ Protocol |
H | Analog Output: 4-20mA dc Digital Protocol: HART Protocol |
| Customer Interface Selections |
B | Indicator: Basic Ext Zero, Span & Config Buttons: None Languages: EN |
| Application Software |
1 | Standard Diagnostics |
| Output Limit, Failsafe & Write Protect Settings |
1 | Write Protect: Disabled Fail Mode: High> 21.0mAdc High & Low Output Limits(4): Honeywell Std (3.8 – 20.8 mAdc) |
| General Configuration |
S | Factory Standard |
| Accuracy and Calibration |
B | Accuracy: Standard Calibrated Range: Custom (Unit Data Required) Calibration Qty: Single Calibration |
| Mounting Bracket |
2 | Bracket Type: Angle Bracket Material: 304 SS |
| Customer Tag |
1 | One Wired Stainless Steel Tag (Up to 4 lines 26 char/line) |
| Unassembled Conduit Plugs & Adapters |
A0 | No Conduit Plugs or Adapters Required |
| Certifications & Warranty |
FX F1 02 |
EN10204 Type 3.1 Material Traceability (FC33341) Calibration Test Report & Certificate of Conformance (F3399) Extended Warranty Additional 2 years |
| Factory | 0000 | Factory Identification |
- Reference head available with Dual Head Gage models only. In-Line Gage models are supplied with Process Head only.
- STG830,840,870 supplied via 1/2\’ flange adapter same material as process head except carbon steel shall use 316 SS
- Left side/Right side as viewed from the customer connection perspective
- NAMUR Output Limits are configurable by customer
- Estimated Lead Time: 12 – 16 Weeks
- Shipping Weight: 10 Kg
